[Jan 03, 2025] Get New NS0-184 Certification – Valid Exam Dumps Questions
100% Passing Guarantee - Brilliant NS0-184 Exam Questions PDF
NEW QUESTION # 23
Your customer currently has a 4-node AFF A400 cluster that runs ONTAP 9.8, with two NS224 shelves that are connected to each HA pair. The customer needs to add additional capacity to the cluster.
Which two actions would enable the customer to accomplish this task? (Choose two.)
- A. Connect the new NS224 shelves to the existing Cisco Nexus 3232C switches.
- B. Deploy a new AFF A400 to the cluster.
- C. Connect the new NS224 shelves to the existing NS224 shelves and adjust the shelf IDs.
- D. Deploy new, dedicated, storage switches for the new NS224 shelves.
Answer: B,C
NEW QUESTION # 24
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?
- A. Active IQ OneCollect
- B. Interoperability Matrix Tool
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: C
NEW QUESTION # 25
On which type of network interfaces are the cluster interconnect LIFs created?
- A. on an FC or FCoE port
- B. on an interface group
- C. on a physical port
- D. on a UTA port shared with other LIFs
Answer: B
NEW QUESTION # 26
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. Active IQ Config Advisor worksheet
- B. Active IQ scheduled reports
- C. NetAppDocs output report
- D. ONTAP System Manager
Answer: B
NEW QUESTION # 27
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
- A. Active IQ One Collect
- B. NetAppDocs
- C. Active IQ Unified Manager
- D. NET2
Answer: B
NEW QUESTION # 28
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. All NL-SAS drives are divided evenly across both nodes.
- B. A NAS protocol is licensed on both nodes.
- C. A SAN protocol is licensed on both nodes.
- D. All NL-SAS drives are assigned only to one of the nodes.
Answer: A,B
NEW QUESTION # 29
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. data switch cabling
- B. shelf connectivity
- C. cluster switch cabling
- D. node CPU utilization
Answer: B,D
NEW QUESTION # 30
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use ONTAP System Manager to upload and install the new software image.
- B. Use the cluster image package get and cluster image update commands.
- C. Use ONTAP System Manager to download and install the new software image.
- D. Use a USB drive with the new software image and let ONTAP automatically boot.
Answer: B,C
NEW QUESTION # 31
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 32
A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)
- A. A SnapMirror Synchronous license is required on both the source and destination clusters.
- B. A SnapMirror license is not required on both the source cluster and the destination cluster.
- C. A SnapMirror license is required on both the source cluster and the destination cluster.
- D. A SnapMirror Synchronous license is required on the source cluster.
Answer: A,B
NEW QUESTION # 33
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. client network
- B. cluster LIFs
- C. private network
- D. management LIFs
Answer: B,C
NEW QUESTION # 34
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A. A LIF is created within a broadcast domain and contains a pool of IP address.
- B. A LIF separates network domains to access cluster data.
- C. A LIF is a port that provides physical connections.
- D. A LIF is an IP address or a WWPN that is associated with a port.
Answer: D
NEW QUESTION # 35
You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.
Which three tools do you need to complete this installation? (Choose three.)
- A. Phillips #2 screwdriver
- B. slide rail kit
- C. cable management tray
- D. additional network cables
- E. laptop computer
Answer: A,D,E
NEW QUESTION # 36
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Active IQ Config Advisor
- B. Hardware Universe
- C. Active IQ System Manager
- D. Interoperability Matrix Tool
Answer: A,D
NEW QUESTION # 37
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Disable out-of-band ACP.
- B. Move the SAS cables to a new stack.
- C. Remove the Ethernet cables.
- D. Enable in-band ACP.
Answer: A,B
NEW QUESTION # 38
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. NVMe
- B. CIFS
- C. iSCSI
- D. FCP
Answer: B,D
NEW QUESTION # 39
......
The NS0-184 certification exam is beneficial for professionals who want to enhance their career prospects in the field of storage installation engineering. NetApp Certified Storage Installation Engineer, ONTAP certification exam is recognized globally and is highly respected in the industry. Candidates who pass the NS0-184 certification exam can demonstrate their expertise in NetApp ONTAP storage systems, making them more valuable to their organizations.
To prepare for the NS0-184 exam, candidates can take advantage of various resources available online, including study guides, practice exams, and training courses. These resources are designed to help candidates prepare for the exam and to gain the knowledge and skills needed to pass the certification program. Candidates can also take advantage of online forums and discussion groups to interact with other professionals who are preparing for the exam and to ask questions and share information.
Free NS0-184 braindumps download: https://pdfpractice.actual4dumps.com/NS0-184-study-material.html