[Q11-Q31] S1000-002 Certification - The Ultimate Guide [Updated 2022]

Share

S1000-002 Certification - The Ultimate Guide [Updated 2022]

S1000-002 Practice Exam and Study Guides - Verified By Actual4Dumps


The best way to study for an IBM S1000-002 Exam is by getting as many practice quizzes as possible

To help you get prepared for the IBM S1000-002 exam, we have created this special tool that will help you to get ready with everything you will need to know before taking the test. We want to help you succeed and pass your test as soon as possible, so we have compiled this material with everything you will need to know before getting started. Do not stress yourself too much while preparing for the test because when it comes to certifications there is nothing worse than taking a test without preparation. You may be able to memorize all the facts and questions but remember that your success is measured by how well you answer any question in the shortest time possible, which can only be achieved by having a large number of practice exams under your belt. IBM S1000-002 exam dumps contains all the questions from the actual exam. We have compiled for you an extensive collection of questions, answers, and explanations along with detailed explanations so that you can learn from your mistakes and increase your chances of passing the first time in. IBM realized that you need to practice as many times as you can before you go into your exam. They also realize that when you practice, having questions that are similar to what will appear on your real exam is essential. That is why they created the S1000-002 Exam overview practice test for all of their candidates. You can take practice quizzes and exams in the Test section of this site. We have a large collection of test questions with explanations for you to get prepared for your real S1000-002 Exam.

 

NEW QUESTION 11
The Cloud Pak for Data System web console displays the storage details. How much total storage is available for the worker nodes?

  • A. 128,000 GB
  • B. 26,624 GB
  • C. 30,720 GB
  • D. 64,000 GB

Answer: C

 

NEW QUESTION 12
After setting up the Call Home configuration, which command is used to generate a test alert?

  • A. ap event --test_callHome_connect
  • B. ap callHome --verify
  • C. ap issues --generate_test_alert
  • D. ap hw --genreate_test_alert

Answer: C

 

NEW QUESTION 13
Which two methods can be used to obtain the software inventory and monitor software components status in Cloud Pak for Data System? (Choose two.)

  • A. Audit log: apsyslog
  • B. Web Console: Software overview page
  • C. Query the systemd journal: journalctl
  • D. Service manager status: systemctl status icp4d
  • E. Command line: aps w -d

Answer: A,D

 

NEW QUESTION 14
What are two types of alert rules in Cloud Pak for Data System? (Choose two.)

  • A. action rules
  • B. Call Home rules
  • C. SNMP rules
  • D. email rules
  • E. trap rules

Answer: B,C

 

NEW QUESTION 15
What is the result of running the ap sw command?

  • A. It displays information about malfunctioning software only.
  • B. It displays information about IBM Netezza Performance Server software only.
  • C. It displays the software inventory with status of each component.
  • D. It displays the current issues caused by the software.

Answer: C

 

NEW QUESTION 16
Which two options are available to backup data on Cloud Pak for Data System? (Choose two.)

  • A. to Portworx storage
  • B. to NFS storage
  • C. to local disk
  • D. to media tapes
  • E. to IBM Spectrum Scale

Answer: A,D

 

NEW QUESTION 17
Which command will manually close an alert with id 1234?

  • A. ap --close alert 1234
  • B. ap issues -d 1234
  • C. ap issues --close 1234
  • D. ap --close 1234

Answer: B

 

NEW QUESTION 18
Which node personality should be used before scaling up a Cloud Pak for Data System environment?

  • A. none
  • B. default
  • C. unset
  • D. undefined

Answer: B

 

NEW QUESTION 19
What is the automated notification process that detects problem conditions and reports them to IBM Support?

  • A. Call Home
  • B. Resource Manager
  • C. Platform Communication
  • D. Host Platform Interface

Answer: A

 

NEW QUESTION 20
Which node personality type can host any service, container, or pod as designated by Cloud Pak for Data System?

  • A. unset
  • B. control
  • C. labeled
  • D. universal

Answer: D

 

NEW QUESTION 21
What can be used on Cloud Pak for Data System to manage the platform software, hardware, users, and configure the Call Home feature?

  • A. Red Hat OpenShift
  • B. Resource Manager
  • C. Platform Manager
  • D. web console

Answer: D

 

NEW QUESTION 22
Which two symptoms are available for data collection using the apdiag command in Cloud Pak for Data System? (Choose two.)

  • A. crash_issue
  • B. hang_issue
  • C. docker_issue
  • D. thinpool_issue
  • E. platformmanager_issue

Answer: A,C

 

NEW QUESTION 23
Which statement is correct regarding external LDAP configuration for Cloud Pak for Data System?

  • A. If external LDAP is disabled, then external users do not need to be recreated, they will automatically authenticate locally.
  • B. Once external LDAP support has been disabled from the system, the required users need to be recreated as local users.
  • C. An administrator needs to add the user IDs from their external Windows AD server to all 3 local server groups of the system.
  • D. User IDs from the external Windows AD server do not need to be added to the local server groups of the system.

Answer: D

 

NEW QUESTION 24
Which two Cloud Pak for Data System prerequisites must be met in order to forward logs to a remote log server? (Choose two.)

  • A. The unset nodes should be set to logging.
  • B. The remote logging server must be enabled to accept forwarding messages form control nodes.
  • C. The remote logging server must have at least 100 GB of storage.
  • D. The control nodes must to be enabled with the external IP address configured.
  • E. The worker nodes should be set to logging.

Answer: A,B

 

NEW QUESTION 25
What utility can be used to validate the System_Name.yml file?

  • A. ap validate System_Name.yml
  • B. validate_config.sh
  • C. aposYmlCheck.py
  • D. validateYml.py

Answer: C

 

NEW QUESTION 26
In Cloud Pak for Data Systems, which command is used to list all closed alerts in last 7 days?

  • A. ap issues --list_closed_events
  • B. ap issues -c
  • C. ap issues | grep closed
  • D. ap list -type events

Answer: B

 

NEW QUESTION 27
......

Ultimate Guide to the S1000-002 - Latest Edition Available Now: https://pdfpractice.actual4dumps.com/S1000-002-study-material.html