Use the best ways of preparing for 1Y0-241 Exam Dumps with Actual4Dumps Citrix 1Y0-241 dump PDF [2024]
Citrix 1Y0-241 exam candidates will surely pass the Exam if they consider the 1Y0-241 dumps learning material presented by Actual4Dumps.
NEW QUESTION # 20
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC VPX
- C. Citrix ADC SDX
- D. Citrix ADC MPX
Answer: A
Explanation:
it is the CPX, which is not a full scale solution. You don't need a full virtual like VPX to run CPX inside Docker for Linux, that is the budget choice.
NEW QUESTION # 21
Which two items must be true for a client to connect to an SSL offload vServer without any SSL errors?
(Choose two.)
- A. The root certificate is installed on the client s device.
- B. The server certificate is bound to the load-balancing vServer.
- C. The root certificate is installed on the Citrix ADC.
- D. The server certificate is from a private certificate authority (CA).
Answer: A,B
NEW QUESTION # 22
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?
- A. SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)
- B. SYS.CHECK.LIMIT(<limit_identifier>)
- C. SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)
- D. HTTP.REQ.LIMIT(<limit_identifier>)
Answer: B
NEW QUESTION # 23
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Purchase another Citrix ADC MPX appliance.
- B. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
- C. Plug another 10G Citrix ADC port into the router.
- D. Add two more 10G Citrix ADC ports to the network and configure VLAN.
Answer: B
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/networking/interfaces/configuring-link-aggregation.html
NEW QUESTION # 24
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)
- A. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - B. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE - C. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - D. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 100 END -type REQ_OVERRIDE - E. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - F. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE
Answer: D,F
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX131868
NEW QUESTION # 25
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. DNS
- B. SSL
- C. Integrated caching
- D. System
Answer: A,C
NEW QUESTION # 26
Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold.
How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?
- A. Configure TCP Insight on the Citrix ADM.
- B. Configure network reporting on the Citrix ADM by setting the threshold and email address.
- C. Configure specific alerts for vServers using Citrix ADM.
- D. Configure SMTP reporting on the Citrix ADM by adding the threshold and email address.
Answer: B
NEW QUESTION # 27
How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to 1.0 in every request?
- A. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - B. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT - C. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - D. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT
Answer: D
NEW QUESTION # 28
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
- A. Log facility is NOT configured.
- B. User-defined audit log is NOT configured.
- C. Log level is NOT enabled.
- D. TCP logging is NOT enabled.
Answer: D
Explanation:
Explanation
https://support.citrix.com/article/CTX226058
NEW QUESTION # 29
Scenario: A Citrix Administrator configured a rewrite action as follows:
> add rewrite action sync_date replace http.res.date.sys.time
What is the correct way to interpret this rewrite action?
- A. It is invalid, as system time CANNOT be referenced in the system policy.
- B. It replaces the date header in the HTTP response with the Greenwich Mean Time (GMT) time stamp.
- C. It replaces the date header in the HTTP response with the Citrix ADC system time in a conventional date format.
- D. It replaces the Citrix ADC system time with the date header in a conventional date format.
Answer: C
Explanation:
Explanation
answer: A. It replaces the date header in the HTTP response with the Citrix ADC system time in a conventional date format.
Short Explanation with reference:
A rewrite action is a set of rules that defines how the Citrix ADC appliance modifies the requests and responses that it processes. A rewrite action can use different parameters, such as target, expression, and pattern, to specify what part of the message to modify and how to modify it. The target parameter specifies the part of the message that is modified, such as the header or the body. The expression parameter specifies the new value that replaces the target. The pattern parameter specifies a string or a regular expression that matches the part of the target that is replaced.
In this scenario, the administrator configured a rewrite action as follows:
add rewrite action sync_date replace http.res.date.sys.time
This rewrite action uses the replace parameter, which replaces the entire target with the expression. The target is http.res.date, which is the date header in the HTTP response. The expression is sys.time, which is a built-in function that returns the Citrix ADC system time in a conventional date format, such as "Wed, 06 Sep 2023
12:45:12 GMT". Therefore, this rewrite action replaces the date header in the HTTP response with the Citrix ADC system time in a conventional date format. This can be useful for synchronizing the time between the server and the client, or for preventing caching issues.
Therefore, the correct way to interpret this rewrite action is A. It replaces the date header in the HTTP response with the Citrix ADC system time in a conventional date format.
Configuring rewrite actions | NetScaler : How to Configure Rewrite Action - Citrix Customer Support : How to Use Built-in Functions in Expressions - Citrix Customer Support
NEW QUESTION # 30
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_9
- B. CSPOL_5
- C. CSPOL_8
- D. CSPOL_4
Answer: A
Explanation:
https://training.citrix.com/public/Exam%20Prep%20Guides/231/1Y0-231_Exam_Preparation_Guide_v01.pdf
NEW QUESTION # 31
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
Answer: A
NEW QUESTION # 32
What can a Citrix Administrator use to restrict access to the Citrix ADC management IP (NSIP) address?
- A. Command policy
- B. Authentication policy
- C. Authorization policy
- D. Access Control List (ACL)
Answer: D
NEW QUESTION # 33
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. REPLACE_HTTP_REQ
- B. CORRUPT_HTTP_HEADER
- C. REPLACE
- D. REPLACE_ALL
Answer: C
NEW QUESTION # 34
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image shrink-to attributes
- B. Image optimization
- C. Domain sharding
- D. Image lazy loading
Answer: B
NEW QUESTION # 35
Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?
- A. SSL
- B. HTTP
- C. DTLS
- D. TCP
Answer: A
NEW QUESTION # 36
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A. the kernel
- B. a physical interface
- C. a CPU
- D. memory
Answer: C,D
NEW QUESTION # 37
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
Answer: B
Explanation:
Explanation
https://www.citrix.com/blogs/2014/12/29/netscaler-vlans-demystified/
https://support.citrix.com/article/CTX115575
NEW QUESTION # 38
......
Accurate & Verified Answers As Seen in the Real Exam here: https://pdfpractice.actual4dumps.com/1Y0-241-study-material.html