2024 Updated 350-601 PDF for the 350-601 Tests Free Updated Today!
Fully Updated Dumps PDF - Latest 350-601 Exam Questions and Answers
NEW QUESTION # 122
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 123
Refer to the exhibit.
What is the result of running the command presented?
- A. The PIM database is deleted.
- B. MRIB is flushed.
- C. Multicast traffic forwarding is suspended.
- D. PIM join messages are suspended.
Answer: A
Explanation:
Section: Network
NEW QUESTION # 124
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)
- A. A contract must be defined between the EPGs
- B. The EPGs must link directly to the corresponding AAEP
- C. The EPGs must be linked to the correct physical domain
- D. The corresponding bridge domains must be configured in legacy mode
- E. The EPGs must be configured as static ports
Answer: A,B
NEW QUESTION # 125
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
- A. The destination port for monitoring must be an unassigned Fibre Channel port.
- B. The monitoring of Fibre Channel traffic is limited to the default VSAN.
- C. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
- D. Fibre Channel traffic is monitored only on one vHBA per server.
Answer: D
Explanation:
Explanation
You can monitor Fibre Channel traffic using either a Fibre Channel traffic analyzer or an Ethernet traffic analyzer. When Fibre Channel traffic is monitored with an Ethernet traffic monitoring session, at an Ethernet destination port, the destination traffic is FCoE. The Cisco UCS 6300 Fabric Interconnect supports FC SPAN only on the ingress side. A Fibre Channel port on a Cisco UCS 6248 Fabric Interconnect cannot be configured as a source port.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System- Monitoring/3-2/b_UCSM_GUI_System_Monitoring_Guide_3_2/ b_UCSM_GUI_System_Monitoring_Guide_3_2_chapter_01101.pdf
NEW QUESTION # 126
A customer asks an engineer to develop an orchestration solution to automate repetitive tasks. The customer operations team must integrate the tool with its existing automation framework. The customer asks for the tool to support these requirements:
*The customer's security requirements mandate the use of SSH transport.
*No extra software must be installed on the managed systems.
*The support staff has limited knowledge of scripting languages, so the solution must be easy to read and use declarative language.
Which solution meets these requirements?
- A. Ansible
- B. Chef
- C. PowerShell
- D. Puppet
Answer: A
NEW QUESTION # 127
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The Fibre Channel interface is configured for synchronization distribution.
- B. The Fibre Channel interlace is configured for FSPF.
- C. The Fibre Channel interface is configured for SPAN.
- D. The Fibre Channel interface is configured for source distribution.
Answer: C
Explanation:
Section: Storage Network
NEW QUESTION # 128
A DNS server with IP address 192.168.1.1 is deployed in a data center A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS. Which configuration should be applied?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: B
NEW QUESTION # 129
Refer to the exhibit.
Refer to the exhibit. Esxi-server is associated to the blade server. A VLAN added to trunk- a. the VLAN is missing on the vNIC of ESXI-server. Which action should be taken to add the VLAN to the cNIC?
- A. Remove both template and recreate them as updating templates.
- B. Change the template type of ESXI-Server to an updating template.
- C. Change the template type of Trunk-A to an updating template.
- D. Remove the VLAN from the Trunk-A template and add the VLAN again.
Answer: D
NEW QUESTION # 130
A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified?
(Choose two.)
- A. No Cisco NX-OS image is present on the bootflash.
- B. Bootflash must contain a special directory named POAP with poap.py file.
- C. The license file is missing on the switch.
- D. The switch is in bootup process.
- E. No startup configuration is available.
Answer: B,C
NEW QUESTION # 131
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
- A. NX-OS JSON-RPC
- B. Guest Shell for NX-OS
- C. NX-API Sandbox
- D. Open NX-OS
Answer: C
Explanation:
Section: Automation
Explanation/Reference:
https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox
NEW QUESTION # 132
Refer to the exhibit.
Refer to the exhibit. A developer must create a Bash script that performs a Chef Client reload in the event of a system reset Which command completes the script?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: B
NEW QUESTION # 133
An engineer is duplicating an existing Cisco UCS setup at a new site. What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)
- A. contains the AAA and RBAC configurations
- B. contains all of the configurations
- C. contains the configuration organizations and locales
- D. contains the VLAN and VSAN configurations
- E. contains a file with an extension.tgz that stores all of the configurations
Answer: C,D
Explanation:
Explanation
Logical configuration-An XML file that includes all logical configuration settings such as service profiles, VLANs, VSANs, pools, and policies. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect. You cannot use this file for a system restore.
NEW QUESTION # 134
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes. What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)
- A. performs a complete binary dump of the database as a txz file
- B. contains all of the configurations
- C. contains all of the runtime states and statuses but not the configurations
- D. performs a complete binary dump of the databases as a sql file
- E. performs a complete binary dump of the database as a bin file
Answer: B,E
NEW QUESTION # 135
An engineer must configure two Cisco Nexus 7000 series switches in the same data center to support OTV. Which command set completes the join interface configuration?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 136
Refer to the exhibit.
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. Option B
- B. Option E
- C. Option D
- D. Option C
- E. Option A
Answer: B,C
NEW QUESTION # 137 
Refer to the exhibit. An engineer needs to implement streaming telemetry on a cisco MDS 9000 series switch.
The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration meet this requirement?
- A. Sensor-grp 200 sample-period 30000
- B. Snsr-grp 200 sample-interval 30000
- C. Sensor-grp 200 sample-period 30
- D. Snsr-grp 200 sample-interval 30
Answer: B
Explanation:
Explanation
snsr-grp <id> sample-interval <interval> Currently, sensor group ID supports only numeric ID values. Specify the streaming sample interval value; the value must be in milliseconds. The minimum streaming sample interval that is supported is 30000 milliseconds.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds900
NEW QUESTION # 138
What is a recommended design choice in a topology for multipathing iSCSI traffic?
- A. single initiator to dual targets
- B. initiators and targets in separate subnets
- C. two NICs bended together on the initiator
- D. dual initiators to a single target with bonded interfaces
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/ system_management/configuration/guide/n1000v_system/n1000v_system_13iscsi.html#wp1052813
NEW QUESTION # 139
An engineer must configure remote authentication on a Cisco UCS system. The user password must be encrypted before it is sent to the authentication server. The company security policy requires the server to be based on an open standard. Drag and drop the UCS CLI AAA configuration commands from the left into the order in which they must be implemented on the right. Not all commands are used.
Answer:
Explanation:
Explanation
UCS-A# scope security
UCS-A /security # scope radius
UCS-A /security/radius # create server radiusserv7
UCS-A /security/radius/server* # set key
UCS-A /security/radius/server* # commit-buffer
NEW QUESTION # 140
Which method must a network engineer use to upgrade the BIOS firmware of a Cisco UCS standalone C-Series reck-mount server?
- A. Use the Cisco host firmware policy.
- B. Use the Cisco hardware upgrade utility.
- C. Use the Cisco host upgrade utility.
- D. Use the U-ACPI Interface.
Answer: C
NEW QUESTION # 141
Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 Series Switch that has dual supervisor modules and two I/O modules?
- A. install all kickstart <image> system <image>
- B. install all epld bootflash:<image> parallel
- C. install all epld bootflash: <image>
- D. install all kickstart <image> system <image> parallel
Answer: D
NEW QUESTION # 142
A company is running a pair of cisco Nexus 7706 series switches as part of a data center segment. All network engineers have restricted read-Write access to the core switches. A network engineer must a new FCoE VLAN to allow traffic from services toward FCoE storage. Which set of actions must be taken to meet these requirements?
- A. 1. Add the required privilege to the VDC-admin role.
2. Commit the changes to the active user database. - B. 1. Assign the network-admin role to a user.
2. Commit the role to the switch to the active user database - C. 1. Create a user defined role and add the required privileges.
2. Assign a role to a user. - D. 1. Modify a network-operator role and add the required privileges.
2. Assign a VDC-operator role to a user.
Answer: A
NEW QUESTION # 143
A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction. which configuration should be implemented to achieve this objective?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 144
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The Fibre Channel interface is configured for synchronization distribution.
- B. The Fibre Channel interface is configured for FSPF.
- C. The Fibre Channel interface is configuration for source distribution.
- D. The Fibre Channel interface is configured for SPAN.
Answer: D
NEW QUESTION # 145
......
Free 350-601 Exam Questions 350-601 Actual Free Exam Questions: https://pdfpractice.actual4dumps.com/350-601-study-material.html